A portable remote controller with a 1,000-nit high-brightness screen for clear visibility in direct sunlight, a built-in microphone for clear communication, and 1.5-hour 65W fast charging.
Aerosmart UAV Trading L.L.C. is a tech company that specialises in drones and solutions in the UAE and across the GCC.
The DJI Mavic 3 Enterprise Series sets a new performance ceiling for compact commercial drones. A mechanical shutter, 56× zoom camera, and RTK module for centimeter-level positioning make the Mavic 3E a precision mapping platform that punches well above its size. Where thermal capability matters — firefighting, search and rescue, inspection, and after-dark operations the Mavic 3T steps in without adding platform complexity.
Compact and Portable
4/3 CMOS Wide Camera
56× Hybrid Zoom
640 × 512 px Thermal Camera
45-min Max Flight Time
DJI O3 Enterprise Transmission
Centimeter-level Positioning with RTK
High-Volume Loudspeaker
The DJI Mavic 3 Enterprise Series fits in one hand and deploys without setup overhead, making it equally practical for experienced operators running complex missions and newer pilots entering commercial drone work.

Wide
4/3 CMOS, 20 MP, Mechanical Shutter
Tele
Equivalent Focal Length: 162mm, 12 MP, 56× Hybrid Zoom
Wide
Equivalent Focal Length: 24mm, 48 MP
Tele
Equivalent Focal Length: 162mm, 12 MP, 56× Hybrid Zoom
Thermal
DFOV: 61°, Equivalent Focal Length: 40mm, Resolution 640 × 512
Wide
Equivalent Focal Length: 24mm, 48 MP
Tele
Equivalent Focal Length: 162mm, 12 MP, 56× Hybrid Zoom
Thermal
DFOV: 41.2°, Equivalent Focal Length: 60mm, Resolution 640 × 512
The DJI Mavic 3E’s 4/3 CMOS 20MP wide-angle sensor uses a mechanical shutter that eliminates motion blur during fast survey passes, paired with 0.7-second interval shooting for continuous high-speed data capture. Mapping missions complete with strong efficiency, and RTK support removes the dependency on Ground Control Points entirely.
Large 3.3μm pixels on the DJI Mavic 3E wide camera gather more light per pixel than smaller sensors, and the intelligent low-light mode processes that input to deliver substantially cleaner images in dim field conditions.
All three DJI Mavic 3 Enterprise models carry a 12MP tele camera with up to 56× Max Hybrid Zoom, resolving critical details at distances where getting physically closer isn’t safe or practical.
The DJI Mavic 3T and Mavic 3T Advanced carry a 640×512 thermal camera that measures temperature at individual points and across defined areas, triggers alerts when readings exceed set thresholds, and presents data through selectable colour palettes and isotherm overlays giving operators the information they need to identify targets and act quickly.
The DJI Mavic 3T and Mavic 3T Advanced run thermal and zoom feeds simultaneously in a split-screen view with 28× continuous zoom on both for direct real-time comparison.
At 45 minutes per flight, the DJI Mavic 3 Enterprise Series covers up to 2 square kilometres of survey area in a single run without battery swaps. Ground turnaround is fast the charging hub runs at 100W and direct aircraft charging reaches 88W.
Fast charge batteries with 100W charging hub, or directly charge the drone with 88W fast charging.
O3 Enterprise Transmission runs through four built-in antennas two dedicated to outbound signal, all four receiving simultaneously which significantly improves anti-interference performance compared to single-path systems. Both the aircraft and remote controller support the DJI Cellular Dongle, enabling 4G Enhanced Transmission to operate alongside O3 as a parallel link for sustained stability in obstructed or signal-dense environments.
Wide-angle lenses covering all sides give the DJI Mavic 3 Enterprise Series full omnidirectional obstacle detection without blind spots. Proximity alarm thresholds and braking distances adjust to mission requirements. Advanced RTH calculates the most efficient route home automatically, conserving both power and flight time.
Advanced RTH automatically plans the optimal route home, saving power, time, and hassle.
APAS 5.0 detects obstacles ahead and reroutes the aircraft around them in real time, keeping operations moving without manual intervention or course corrections from the pilot.
Altitude adjusts continuously in response to ground elevation changes during mapping flights, maintaining a consistent height above the actual terrain surface throughout the mission. The DJI Mavic 3E’s omnidirectional sensing handles this in real time without requiring external elevation data to be imported before flight.
Smart Oblique Capture automates the gimbal rotation sequence front, centre, and rear angles captured systematically across two flight routes. The result is a complete multi-angle dataset for high-precision 3D modelling without additional passes or manual camera adjustments during the mission.
Aircraft movement, gimbal position, capture triggers, and zoom level all record into a replayable mission file that turns any manual flight into a template for future fully automated repeat operations.
Linear features roads, rivers, pipelines, transmission lines map efficiently with Corridor Mission Planning. Draw the centreline on the map and the system divides the full route into structured, overlapping survey segments that the aircraft covers automatically without additional planning input.
A portable remote controller with a 1,000-nit high-brightness screen for clear visibility in direct sunlight, a built-in microphone for clear communication, and 1.5-hour 65W fast charging.
The DJI Pilot 2 Enterprise interface was rebuilt to keep piloting efficient and safety information front and centre. Aircraft and payload controls reach with a single tap from the main screen. Flight data, navigation, and route status present clearly without cluttering the view, and the full range of supported route types is accessible from the same interface. User Data Secur
Local Data Mode
One-Tap Clear Logs
AES-256 Video Transmission Encryption
Cloud API
Payload SDK provides a standardised connection layer for integrating third-party hardware with the DJI Mavic 3 Enterprise Series, expanding mission capability beyond the standard sensor configuration.
Learn More ↗Mobile SDK 5 gives development teams an open-source foundation for building custom control applications on the DJI Mavic 3 Enterprise Series, with production-ready DJI Pilot 2 code samples included as a proven starting reference.
Learn More ↗DJI Pilot 2’s built-in MQTT-based Cloud API connects the DJI Mavic 3 Enterprise Series directly to third-party cloud platforms without requiring a custom application build. Hardware status, live video streams, and captured photo data are all accessible through the API from any connected platform.
Learn More ↗
Your journey into the extraordinary begins here. Share your details for a personalized DJI Mavic 3 Multispectral quote and let your imagination soar.
✅ Thank you for reaching out. Your message has been successfully sent, and our team will get in touch with you shortly.